The selection of All STST pressure gauge should be based on the specific situation and meet the technical requirements of the process. At the same time, the cost aspect should also be considered. We recommend that the following aspects should be considered when selecting instruments:

A pressure sensor is a sensor that converts pressure into electrical signal output. While talking about pressure sensors, the concept of pressure sensors must be derived. Traditional sensors consist of sensitive elements and conversion elements. Among them, the sensitive element refers to the part o......

At present, shock-resistant diaphragm pressure gauges have a very wide range of applications in the instrumentation industry, and can be used in different products in different fields. With the continuous expansion of the market, the structure, form and specification of products are becoming more an......

The pressure thermometer is a newly developed new type of temperature measuring instrument, which solves the shortcomings of poor reliability and large temperature error. It adopts a miniature...

The meter must be vertical: use a 17mm wrench to tighten it during installation, and the case should not be twisted; collisions should be avoided during transportation;

Overflow hole: In the event of an emergency in which the Bourdon tube bursts, the internal pressure will be released to the outside through the overflow hole to prevent the glass panel from bursting.