First of all, the influence of the temperature pointer pressure gauge is the influence of the pressure on the bending deformation of the spring. If the temperature of the medium entering the spring bending is high, the effect of temperature will also lead to bending deformation.

If the All STST pressure gauge is inaccurate in the process of use, it is a serious problem, because the most important work for us to use it is to measure, if there is an error in the indication, then it is useless. . Next, let's take a look at its specific use.

The pressure gauge has no indication.Reason: 1. The shut-off valve on the pressure guiding pipe is not opened.2. The pressure guiding pipe is blocked;3. Too much dirt accumulates in the spring pipe joint and is blocked;

First of all, the influence of the temperature pointer pressure gauge is the influence of the pressure on the bending deformation of the spring. If the temperature of the medium entering the spring bending is high, the effect of temperature will also lead to bending deformation.

Bimetal thermometers and rod-shaped liquid-in-glass thermometers have similar uses, but can be used under conditions where greater mechanical strength is required.

For the installation of bimetal thermometers, it should be noted that it is conducive to accurate temperature measurement, reliability and convenient maintenance, and does not affect equipment operation and production operations. To meet the above requirements, pay attention to the following points ......