All the body of the Ningdian® all STST pressure gauge is sealed, Therefore, it is filled with glycerin or silicone , but at least two points must be considered when making a specific choice:
1. The thermal expansion coefficient, the smaller the coefficient, the better, which is mainly affected by temperature;
2. The use occasion , Neither of these two oils can be used in the food industry. If the diaphragm is damaged, the oil will contaminate the food. It is also not recommended in places where strong oxidants are measured, otherwise it will cause an explosion. Therefore, it can be used in places with vibration, but it should be noted that it has two types of silicone oil and glycerin.
If it is used for outdoor low temperature, you must use a silicone oil meter.
Becasue of its good quality raw material--- stainless steel, Ningdian® all STST pressure gauge has the following benifits:
Size: |
From 1.5” to 6” |
Pressure Range: |
From 30inHg to 1600bar |
Socket: |
304 St St ,316 St St material |
Thread: |
BSP,NPT,BSPT,PT,ZG, and other special specification |
Bourdon Tube: |
316 Stainless Steel material |
Lower Case : |
304 St St ,316 St St material,polished or not polished, back with no screws |
Bezel: |
304 St St crimped bezel or 316 St St crimped bezel,bayonet |
Window: |
PC lens or glass lens |
Dial Plate: |
Single ,dual or three cales(Bar, Psi,Kg/ c㎡, Kpa, Mpa) |
Accuracy: |
3-2-3%,2.5%,1.6%,1% |
Movement: |
304 stainless steel material |
Pointer: |
Aluminium or stainless steel material(adjust type) |
U-Clamp: |
304 St St material |
Flange: |
304 St St material |
Restrictor: |
304 St St material |
Over Pres sure: |
130% |